Was this page helpful?

Dinstar GSM VoIP Gateway

    介紹

    dinstar-1.jpgDinstar DWG2000E GSM/CDMA/WCDMA VoIP Gateway

    官網商品連結:http://www.dinstar.com/product/gsm/20150116223.html

    Features

    • 8 GSM/CDMA/WCDMA Channels                                                                              
    • GSM: Quad-band 850/900/1800/1900MHz          
    • CDMA: 800MHz                                                    
    • PSTN and VoIP Hotline                                         
    • Up to 8 Concurrent Calls                                      
    • Flexible Dial Rules and Manipulation Rules  
    • SMS Sending and Receiving     
    • USSD, Open API for SMS/USSD
    • BCCH
    • Carrier Selection
    • PIN Code Management
    • Remote SIM Card Management(SIMCloud) 

     

    Specification

    請見官網或附檔區的手冊

    整合 FreePBX 的設定

    • Inbound Calls:Gateway 與 FreePBX 可以是不同的 NAT 網路
    • Outbound Calls:
      • Gateway 與 FreePBX 必須是同一個 LAN
      • FreePBX 使用 public IP,Gateway 是遠端的 NAT 網路
    Inbound 設定

    System Configuration > Service Parameter

    • Only Accept Calls from SIP Server                   = Yes
    • Allow Call from GSM to IP without Registration = No
    • Allow Call from IP to GSM without Registration = No
       

    System Configuration > SIP Parameter

    • SIP Server Address = <FreePBX IP>
    • SIP Server Port      = <FreePBX Port>
    • Is Register            = Yes
       

    System Configuration > SIP Parameter > Port 0

    • Current Port               = Port 0
    • SIP User ID                 = <Trunk Name on FreePBX>
    • Authenticate ID           = <Trunk Name on FreePBX>
    • Authenticate Password = <Trunk Password on FreePBX>
    • Local SIP Port              = <不可與其他 Port 或本地端的其他 SIP 裝置相同>
       

    IP Trunk Configuration > IP Trunk

    • IP              = <FreePBX IP>
    • Port           = <FreePBX Port>
    • Description = MyPBX
       

    Operation > Tel->IP Operation

    • Source Prefix       = Any
    • Source Port         = port, Any
    • Destination Prefix = Any
    • Operation            = Allow Call, Auto Call
    • Description          = Forward all calls
       

    Routing Configuration > Routing Parameter

    • IP->Tel Parameter = Route calls before manipulation
    • Tel->IP Parameter = Route calls before manipulation
       

    Routing Configuration > Tel->IP Routing

    • Description = default
    • Source Prefix = any
    • Source = port, any
    • Destination Prefix = any
    • Destination = SIP Server
    Outbound 設定

    方法一:gateway 註冊到 FreePBX 的 Trunk

    Call Configuration > SIP Configuration

    • SIP Server Address: FreePBX Server's IP
    • SIP Server Port: 5060
    • Outbound Proxy Address: FreePBX Server's IP
    • Outbound proxy Port: 5060
    • All Ports Register Used Same User ID: YES
    • Use Random Port: NO
    • Local SIP Port: 5060

     

    Call Configuration > SIPTrunk Configuration : 不用設

    Call Configuration > SIPTrunk Group Configuration : 不用設
     

    FreePBX 設定

    SIP Trunk

    • Trunk Name = <whatever>
    • Outbound CallerID = <SIM 卡的手機號碼>
    • Trunk Name = <與 Gateway 的 SIP User ID, Authenticate ID 相同>
    • Peer Details
    host=dynamic
    username=<Gateway 的 SIP User ID, Authenticate ID>
    secret=<Gateway 的 Authenticate Password>
    type=friend
    context=from-trunk
    nat=force_rport,comedia
    qualify=yes
    insecure=port,invite
    

    Inbound Route

    • Description = <whatever>
    • DID Number = 886XXXXXXXXX (SIM 卡的手機號碼,在 gateway 預設就會傳送這號碼)
    • Set Destination = <whatever>
    Was this page helpful?
    標籤 (Edit tags)
    • No tags
    您必須 登入 才能發佈評論。
    Powered by MindTouch Core