PPPoE方案實現IPv6通訊(by ISP solution)
內容表格
Combined revision comparison
...
之後針對intranet部分, 必須使其能夠透過上層的wan與ISP溝通取得IPv6位置. 針對相關的內部介面打入以下命令:
config sys int
edit [YOUR LAN INTERFACE]
config ipv6
set ip6-mode delegated
set ip6-send-adv enable
set ip6-manage-flag dis
set ip6-other ena
set ip6-upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set ip6-subnet ::1/64
config ip6-delegated-prefix-list
edit 1
set upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set autonomous-flag enable
set onlink-flag enable
set subnet ::/64
next
end
end
next
end
* ip6-subnet這個function設定起始的IPv6從::1/64開始.
* set ip6-manage-flag dis將m-bit關閉, 不想要stateful DHCP
* set ip6-other ena打開o-bit, 表示接受DNS等其他額外資訊ena啟用表示接受DNS等其他額外資訊
...
Version from 23:39, 7 Aug 2017
...
之後針對intranet部分, 必須使其能夠透過上層的wan與ISP溝通取得IPv6位置. 針對相關的內部介面打入以下命令:
config sys int
edit [YOUR LAN INTERFACE]
config ipv6
set ip6-mode delegated
set ip6-send-adv enable
set ip6-manage-flag dis
set ip6-other ena
set ip6-upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set ip6-subnet ::1/64
config ip6-delegated-prefix-list
edit 1
set upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set autonomous-flag enable
set onlink-flag enable
set subnet ::/64
next
end
end
next
end
* ip6-subnet這個function設定起始的IPv6從::1/64開始.
* set ip6-manage-flag dis將m-bit關閉, 不想要stateful DHCP
* set ip6-other ena啟用表示接受DNS等其他額外資訊
...
版本為 23:39, 7 Aug 2017
...
之後針對intranet部分, 必須使其能夠透過上層的wan與ISP溝通取得IPv6位置. 針對相關的內部介面打入以下命令:
config sys int
edit [YOUR LAN INTERFACE]
config ipv6
set ip6-mode delegated
set ip6-send-adv enable
set ip6-manage-flag dis
set ip6-other ena
set ip6-upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set ip6-subnet ::1/64
config ip6-delegated-prefix-list
edit 1
set upstream-interface [YOUR WAN INTERFACE WITH PPPOE]
set autonomous-flag enable
set onlink-flag enable
set subnet ::/64
next
end
end
next
end
* ip6-subnet這個function設定起始的IPv6從::1/64開始.
* set ip6-manage-flag dis將m-bit關閉, 不想要stateful DHCP
* set ip6-other ena打開o-bit, 表示接受DNS等其他額外資訊
...