PPPoE方案實現IPv6通訊(by ISP solution)

    內容表格
    您必須比較希望回復版本和目前版本之間的差異,您可以從檔案版本庫中進行比較。

    Combined revision comparison

    正在比較的版本由vxr修改於23:39, 7 Aug 2017,另一版本為, 由vxr修改於23:40, 7 Aug 2017

    ...

    為了省去麻煩, 不想重設IPv6 DNS. 先在GUI介面設定系統的IPv6 DNS. 目標是SLAAC+stateless DHCP, 打入以下命令:
    config sys dhcp6 server
    edit 1
    set interface [YOUR LAN INTERFACE]
    set ip-mode delegated
    set upstream-int [YOUR WAN INTERFACE WITH PPPOE]wan1
    set dns-service def
    next
    end

    ...

    Version from 23:39, 7 Aug 2017

    This revision modified by vxr (Ban)

    ...

    為了省去麻煩, 不想重設IPv6 DNS. 先在GUI介面設定系統的IPv6 DNS. 目標是SLAAC+stateless DHCP, 打入以下命令:
    config sys dhcp6 server
    edit 1
    set interface [YOUR LAN INTERFACE]
    set ip-mode delegated
    set upstream-int wan1
    set dns-service def
    next
    end

    ...

    版本為 23:40, 7 Aug 2017

    This revision modified by vxr (Ban)

    ...

    為了省去麻煩, 不想重設IPv6 DNS. 先在GUI介面設定系統的IPv6 DNS. 目標是SLAAC+stateless DHCP, 打入以下命令:
    config sys dhcp6 server
    edit 1
    set interface [YOUR LAN INTERFACE]
    set ip-mode delegated
    set upstream-int [YOUR WAN INTERFACE WITH PPPOE]
    set dns-service def
    next
    end

    ...

    Powered by MindTouch Core