Sipura ATA Auto-Provisioning

- 設備恢復出廠設定值

不管設備曾作過什麼樣的設定，請將所有的設定回復為出廠設定狀態。
使用一般電話接上 FXS port，繼續以下操作：

按【＊＊＊＊】 > 按【73738＃】> 按【1】

若一切順利，設備會在幾秒鐘後自行重開機。

此時設備的網路設定應為 DHCP 啟動，請將設備接上網路，並確定網路上有 DHCP 服務，繼續以下操作：

按【＊＊＊＊】 > 按【110＃】> 系統會提示目前的 IP 位址，例如 xxx.xxx.xxx.xxx。
 

- 建立合適的設定檔 xml

檔名：init.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<flat-profile>
  <Profile_Rule ua="na">http://your-provision-server/$PN/cfg_$MAU.xml</Profile_Rule>
</flat-profile> 

檔名：cfg_your-mac-address-of-ata.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<flat-profile>
<!-- tag case appears to be important -->
<!-- System -->
   <Admin_Passwd ua="na">your-password</Admin_Passwd>
   <User_Passwd ua="rw">your-password</User_Passwd>
   <Primary_NTP_Server ua="na">pool.ntp.org</Primary_NTP_Server>

<!-- SIP -->
   <RTP_Packet_Size ua="na">0.020</RTP_Packet_Size>

<!-- Provisioning -->
   <Profile_Rule ua="na">http://your-provision-server/$PN/cfg_$MAU.xml</Profile_Rule>
   <Provision_Enable ua="na">Yes</Provision_Enable>
   <Forced_Resync_Delay ua="na">2</Forced_Resync_Delay>
   <Resync_Periodic ua="na">30</Resync_Periodic>
   <Resync_Error_Retry_Delay ua="na">30</Resync_Error_Retry_Delay>

<!-- Regional -->
   <Time_Zone ua="na">GMT+08:00</Time_Zone>
   <!-- Vertical Service Activation Codes -->
   <CW_Act_Code ua="na"></CW_Act_Code>
   <CW_Deact_Code ua="na"></CW_Deact_Code>
   <CW_Per_Call_Act_Code ua="na"></CW_Per_Call_Act_Code>
   <Block_CID_Act_Code ua="na"></Block_CID_Act_Code>
   <CID_Act_Code ua="na"></CID_Act_Code>
   <CID_Deact_Code ua="na"></CID_Deact_Code>
   <CWCID_Act_Code ua="na"></CWCID_Act_Code>
   <CWCID_Deact_Code ua="na"></CWCID_Deact_Code>
   <Dist_Ring_Act_Code ua="na"></Dist_Ring_Act_Code>
   <Dist_Ring_Deact_Code ua="na"></Dist_Ring_Deact_Code>
   <Modem_Line_Toggle_Code ua="na"></Modem_Line_Toggle_Code>

<!-- Line 1 -->
   <SIP_Port_1_ ua="na">5063</SIP_Port_1_>
   <Proxy_1_ ua="na">your-sip-proxy-server</Proxy_1_>
   <Register_Expires_1_ ua="na">300</Register_Expires_1_>
   <Display_Name_1_ ua="na">spa3k-line1</Display_Name_1_>
   <User_ID_1_ ua="na">your-sip-id</User_ID_1_>
   <Password_1_ ua="na">your-sip-pass</Password_1_>
   <Preferred_Codec_1_ ua="na">G729a</Preferred_Codec_1_>
   <Dial_Plan_1_ ua="na">(*xx|*0xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
   <!-- Supplementary Service Subscription;resolving Feature Code on FreePBX conflicts -->
   <Call_Waiting_Serv_1_ ua="na">Yes</Call_Waiting_Serv_1_>
   <Block_CID_Serv_1_ ua="na">No</Block_CID_Serv_1_>
   <Block_ANC_Serv_1_ ua="na">No</Block_ANC_Serv_1_>
   <Dist_Ring_Serv_1_ ua="na">No</Dist_Ring_Serv_1_>
   <Cfwd_All_Serv_1_ ua="na">No</Cfwd_All_Serv_1_>
   <Cfwd_Busy_Serv_1_ ua="na">No</Cfwd_Busy_Serv_1_>
   <Cfwd_No_Ans_Serv_1_ ua="na">No</Cfwd_No_Ans_Serv_1_>
   <Cfwd_Sel_Serv_1_ ua="na">No</Cfwd_Sel_Serv_1_>
   <Cfwd_Last_Serv_1_ ua="na">No</Cfwd_Last_Serv_1_>
   <Block_Last_Serv_1_ ua="na">No</Block_Last_Serv_1_>
   <Accept_Last_Serv_1_ ua="na">NO</Accept_Last_Serv_1_>
   <DND_Serv_1_ ua="na">No</DND_Serv_1_>
   <CID_Serv_1_ ua="na">Yes</CID_Serv_1_>
   <CWCID_Serv_1_ ua="na">Yes</CWCID_Serv_1_>
   <Call_Return_Serv_1_ ua="na">NO</Call_Return_Serv_1_>
   <Call_Redial_Serv_1_ ua="na">No</Call_Redial_Serv_1_>
   <Call_Back_Serv_1_ ua="na">No</Call_Back_Serv_1_>
   <Three_Way_Call_Serv_1_ ua="na">Yes</Three_Way_Call_Serv_1_>
   <Three_Way_Conf_Serv_1_ ua="na">Yes</Three_Way_Conf_Serv_1_>
   <Attn_Transfer_Serv_1_ ua="na">Yes</Attn_Transfer_Serv_1_>
   <Unattn_Transfer_Serv_1_ ua="na">Yes</Unattn_Transfer_Serv_1_>
   <MWI_Serv_1_ ua="na">Yes</MWI_Serv_1_>
   <VMWI_Serv_1_ ua="na">Yes</VMWI_Serv_1_>
   <Speed_Dial_Serv_1_ ua="na">No</Speed_Dial_Serv_1_>
   <Secure_Call_Serv_1_ ua="na">No</Secure_Call_Serv_1_>
   <Referral_Serv_1_ ua="na">Yes</Referral_Serv_1_>
   <Feature_Dial_Serv_1_ ua="na">Yes</Feature_Dial_Serv_1_>
   <Service_Announcement_Serv_1_ ua="na">No</Service_Announcement_Serv_1_>


<!-- PSTN Line -->
   <!-- Network Settings -->
   <Network_Jitter_Level_2_ ua="na">low</Network_Jitter_Level_2_>
   <Jitter_Buffer_Adjustment_2_ ua="na">disable</Jitter_Buffer_Adjustment_2_>
   <!-- SIP Settings -->
   <SIP_Port_2_ ua="na">5061</SIP_Port_2_>
   <!-- Proxy and Registration -->
   <Proxy_2_ ua="na"></Proxy_2_>
   <Make_Call_Without_Reg_2_ ua="na">yes</Make_Call_Without_Reg_2_>
   <Ans_Call_Without_Reg_2_ ua="na">yes</Ans_Call_Without_Reg_2_>
   <Register_Expires_2_ ua="na">300</Register_Expires_2_>
   <!-- Subscriber Information -->
   <Display_Name_2_ ua="na"></Display_Name_2_>
   <User_ID_2_ ua="na"></User_ID_2_>
   <Password_2_ ua="na"></Password_2_>
   <!-- Audio Configuration -->
   <Preferred_Codec_2_ ua="na">G729a</Preferred_Codec_2_>
   <Silence_Supp_Enable_2_ ua="na">no</Silence_Supp_Enable_2_>
   <Echo_Canc_Enable_2_ ua="na">yes</Echo_Canc_Enable_2_>
   <Echo_Canc_Adapt_Enable_2_ ua="na">yes</Echo_Canc_Adapt_Enable_2_>
   <Echo_Supp_Enable_2_ ua="na">yes</Echo_Supp_Enable_2_>
   <DTMF_Process_INFO_2_ ua="na">yes</DTMF_Process_INFO_2_>
   <DTMF_Process_AVT_2_ ua="na">yes</DTMF_Process_AVT_2_>
   <DTMF_Tx_Method_2_ ua="na">Auto</DTMF_Tx_Method_2_>
   <!-- Dial Plans -->
   <Dial_Plan_1_2_ ua="na">(xx.)</Dial_Plan_1_2_>
   <Dial_Plan_2_2_ ua="na">(xx.)</Dial_Plan_2_2_>
   <!-- VoIP-To-PSTN Gateway Setup -->
   <VoIP-To-PSTN_Gateway_Enable_2_ ua="na">yes</VoIP-To-PSTN_Gateway_Enable_2_>
   <VoIP_Caller_Auth_Method_2_ ua="na">none</VoIP_Caller_Auth_Method_2_>
   <VoIP_PIN_Max_Retry_2_ ua="na">3</VoIP_PIN_Max_Retry_2_>
   <One_Stage_Dialing_2_ ua="na">yes</One_Stage_Dialing_2_>
   <Line_1_VoIP_Caller_DP_2_ ua="na">1</Line_1_VoIP_Caller_DP_2_>
   <VoIP_Caller_Default_DP_2_ ua="na">1</VoIP_Caller_Default_DP_2_>
   <Line_1_Fallback_DP_2_ ua="na">none</Line_1_Fallback_DP_2_>
   <!-- PSTN-To-VoIP Gateway Setup -->
   <PSTN-To-VoIP_Gateway_Enable_2_ ua="na">yes</PSTN-To-VoIP_Gateway_Enable_2_>
   <PSTN_Caller_Auth_Method_2_ ua="na">none</PSTN_Caller_Auth_Method_2_>
   <PSTN_Ring_Thru_Line_1_2_ ua="na">yes</PSTN_Ring_Thru_Line_1_2_>
   <PSTN_PIN_Max_Retry_2_ ua="na">3</PSTN_PIN_Max_Retry_2_>
   <PSTN_CID_For_VoIP_CID_2_ ua="na">no</PSTN_CID_For_VoIP_CID_2_>
   <PSTN_CID_Number_Prefix_2_ ua="na"></PSTN_CID_Number_Prefix_2_>
   <PSTN_Caller_Default_DP_2_ ua="na">1</PSTN_Caller_Default_DP_2_>
   <Off_Hook_While_Calling_VoIP_2_ ua="na">no</Off_Hook_While_Calling_VoIP_2_>
   <Line_1_Signal_Hook_Flash_To_PSTN ua="na">Disabled</Line_1_Signal_Hook_Flash_To_PSTN>
   <PSTN_CID_Name_Prefix_2_ ua="na"></PSTN_CID_Name_Prefix_2_>
   <!-- FXO Timer Values (sec) -->
   <VoIP_Answer_Delay_2_ ua="na">0</VoIP_Answer_Delay_2_>
   <VoIP_PIN_Digit_Timeout_2_ ua="na">10</VoIP_PIN_Digit_Timeout_2_>
   <PSTN_Answer_Delay_2_ ua="na">16</PSTN_Answer_Delay_2_>
   <!-- International Control -->
   <SPA_To_PSTN_Gain_2_ ua="na">0</SPA_To_PSTN_Gain_2_>
   <PSTN_To_SPA_Gain_2_ ua="na">0</PSTN_To_SPA_Gain_2_>
   <!-- FXO Timer Values (sec) -->
   <PSTN_Answer_Delay_2_ ua="na">3</PSTN_Answer_Delay_2_>
   <!-- PSTN Disconnect Detection -->
   <Detect_CPC_2_ ua="na">no</Detect_CPC_2_>
   <Detect_Polarity_Reversal_2_ ua="na">no</Detect_Polarity_Reversal_2_>
   <!-- International Control -->
   <FXO_Port_Impedance_2_ ua="na">220+820||120nF</FXO_Port_Impedance_2_>
   <SPA_To_PSTN_Gain_2_ ua="na">1</SPA_To_PSTN_Gain_2_>
   <PSTN_To_SPA_Gain_2_ ua="na">6</PSTN_To_SPA_Gain_2_>

</flat-profile>

特殊字元