PlugPBX

下載 image

http://downloads.plugpbx.org/

寫入 image 至 SDHC 卡

// 下載軟體 win32diskimager
https://launchpad.net/win32-image-writer

開啟軟體，將所下載的 image 寫入到 SDHC。

設定 UBoot 以 SDHC Card 開機

// 檢查 UBoot version 需 3.4.19 以後，才有支援 SDHC 開機
Windows XP 與 SheevaPlug 用 mini-USB 接上，開啟 PuTTY 並開啟 Console 視窗，SheevaPlug 插上電源開機。

透過 PuTTY 的視窗可以看到開機的狀態，當出現

Hit any key to stop autoboot... <按下任一鍵>
Marvell >>

當看到 Marvell 提示字元時，表示已進入了 UBoot 命令模式，輸入以下指令：

Marvell>> setenv mainlineLinux yes
Marvell>> setenv arcNumber 2097
Marvell>> setenv bootargs_console console=ttyS0,115200
Marvell>> setenv bootcmd_mmc 'mmcinit; ext2load mmc 0 0x0800000 /uInitrd; ext2load mmc 0 0x400000 /uImage'
Marvell>> setenv bootcmd 'setenv bootargs $(bootargs_console); run bootcmd_mmc; bootm 0x400000 0x0800000'
Marvell>> saveenv
Marvell>> reset 

若一切順利應該會開始啟動 SDHC 的 PlugPBX 系統。

TIPs:

若開機訊息不小心跳過，可以用 root 登入後，執行 reboot 重開機再來一次，或者拿尖物戳 SDHC 槽右側的小孔。

PlugPBX 系統資訊

檔案系統

PlugPBX:~# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mmcblk0p2        3.4G  854M  2.4G  27% /
tmpfs                 252M     0  252M   0% /lib/init/rw
udev                   10M  128K  9.9M   2% /dev
tmpfs                 252M     0  252M   0% /dev/shm
/dev/mmcblk0p1        206M   17M  179M   9% /boot

PlugPBX:~# mount
/dev/mmcblk0p2 on / type ext2 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/mmcblk0p1 on /boot type ext2 (rw) 

Linux 版本

PlugPBX:~# uname -a
Linux PlugPBX 2.6.30-2-kirkwood #1 Sun Sep 27 22:57:55 UTC 2009 armv5tel GNU/Linux

PlugPBX:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux testing (squeeze)
Release:        testing
Codename:       squeeze

PlugPBX:~# cat /proc/version
Linux version 2.6.30-2-kirkwood (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 Sun Sep 27 22:57:55 UTC 2009

Web UI

Home

ARI

FOP

FreePBX

phpSysInfo

MUNIN

WEBMIN

F.A.Q

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  0
SDHC found. Card desciption is:
Manufacturer:       0x1b, OEM "SM"
Product name:       "00000", revision 1.0
Serial number:      1909810478
Manufacturing date: 9/2010
CRC:                0x00, b0 = 0
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
## Booting image at 00800000 ...
Bad Magic Number

Marvell>> resetenv
Marvell>> reset
...
...
Marvell>> setenv mainlineLinux yes
Marvell>> setenv arcNumber 2097
Marvell>> setenv bootargs_console console=ttyS0,115200
Marvell>> setenv bootcmd_mmc 'mmcinit; ext2load mmc 0 0x0800000 /uInitrd; ext2load mmc 0 0x400000 /uImage'
Marvell>> setenv bootcmd 'setenv bootargs $(bootargs_console); run bootcmd_mmc; bootm 0x400000 0x0800000'
Marvell>> saveenv