Install DB2 v9.7 on CentOS

說明

• CentOS 6.7 x86_64
• IBM DB2 v9.7 Server
   

可支援的 Linux 版本與 Hypervisors (需要虛擬化時)

官網連結：http://www-969.ibm.com/software/repo...Platform=Linux

更多系統需求可以閱讀附檔區的文件。

安裝前步驟

準備安裝檔：

1. DB2_AESE_97_Linux_x86-64.tar.gz，DB2 主程式，必須由支援廠商提供。
2. v9.7fp11_linuxx64_universal_fixpack.tar.gz，DB2 fixpack，可從官網下載。
    

CentOS 安裝模式：Minimal Desktop

需要的其它套件：
NOTE: libstdc++ 需要 32bit 與 64bit 都安裝。

# yum install libstdc++.i686 pam-devel pam-devel.i686 ksh rsh-server

# rpm -qa | grep "ksh\|openssh\|rsh-server\|nfs-utils\|libaio\|libstdc++\|libstdc++.i686\|pam-devel\|pam-devel.i686"
libstdc++-4.4.7-16.el6.x86_64
nfs-utils-lib-1.1.5-11.el6.x86_64
openssh-clients-5.3p1-111.el6.x86_64
pam-devel-1.1.1-20.el6.i686
libaio-0.3.107-10.el6.x86_64
ksh-20120801-28.el6.x86_64
libstdc++-4.4.7-16.el6.i686
openssh-server-5.3p1-111.el6.x86_64
pam-devel-1.1.1-20.el6.x86_64
nfs-utils-1.2.3-64.el6.x86_64
openssh-5.3p1-111.el6.x86_64
rsh-server-0.17-64.el6.x86_64

CentOS 系統調校：

關閉 SELinux
#> setenforce 0
#> sed -i 's/SELINUX=.*$/SELINUX=disabled/' /etc/selinux/config  

停用 NetworkManager
#> service NetworkManager stop
#> chkconfig NetworkManager off

調整系統核心參數

#> ipcs -l

------ Shared Memory Limits --------
max number of segments = 4096                                                     // SHMMNI
max seg size (kbytes) = 67108864                                                    // SHMMAX
max total shared memory (kbytes) = 17179869184             // SHMALL
min seg size (bytes) = 1   

------ Semaphore Limits --------
max number of arrays = 128                                                               // SEMMNI
max semaphores per array = 250                                                     // SEMMSL
max semaphores system wide = 32000                                        // SEMMNS
max ops per semop call = 32                                                                // SEMOPM
semaphore max value = 32767

------ Messages: Limits --------
max queues system wide = 7916                                                      // MSGMNI
max size of message (bytes) = 65536                                             // MSGMAX
default max size of queue (bytes) = 65536                                  // MSGMNB

編輯 /etc/sysctl.conf

• shmmax: 實體記憶體數量 (byte)，如果是 CentOS/RedHat 32-bit，而且使用預設的 Linux kernel 最多只能是 3GB (3221225472)，若改用 hugemem kernel 可以增加到 4GB。參閱文章：https://access.redhat.com/documentat...MAX_Parameter_
• shmall: 實體記憶體數量的 90% (Pages, 4KB/page)，這項沒有 32-bit 限制，依照實際記憶體數量來設定。
• msgmni, sem : 與範例相同
• randomize_va_space: 更新到 FP5 以上時需要

從最下方加上這幾行

# for DB2
# shmmax: 4GB
# shmall: 3.5GB
fs.file-max = 8192
kernel.shmmax = 4294967296
kernel.shmall = 917504
kernel.msgmni = 4096
kernel.sem = 250 256000 32 1024
kernel.randomize_va_space = 0 

套用後再確認一次

#> sysctl -p
#> ipcs -l

------ Shared Memory Limits --------
max number of segments = 4096
max seg size (kbytes) = 4194304
max total shared memory (kbytes) = 3670016
min seg size (bytes) = 1

------ Semaphore Limits --------
max number of arrays = 2048
max semaphores per array = 250
max semaphores system wide = 64000
max ops per semop call = 32
semaphore max value = 32767

------ Messages: Limits --------
max queues system wide = 4096
max size of message (bytes) = 65536
default max size of queue (bytes) = 65536

更多的指令用法

查詢目前系統的參數值
#> cat  /proc/sys/kernel/shmmax
#> cat /proc/sys/kernel/shmall

#> ipcs -lm
------ Shared Memory Limits --------
max number of segments = 4096
max seg size (kbytes) = 3145728                                                  SHMMAX
max total shared memory (kbytes) = 2621440                   SHMALL
min seg size (bytes) = 1

安裝開始

tar xzf DB2_AESE_97_Linux_x86-64.tar.gz
cd aese/
./db2prereqcheck
./db2_install -f NOTSAMP

tar xzf v9.7fp11_linuxx64_universal_fixpack.tar.gz
cd universal/
./db2prereqcheck

./installFixPack

新增 DB Instance

#> groupadd db2adm
#> useradd -g db2adm -c "DB2 Instance User" devinst

#> cd /opt/ibm/db2/V9.7/instance/
#> ./db2icrt -s ese -u devinst devinst 

匯入 DB2 授權檔

注意事項:

• 匯入 license 必須使用 DB Instance 的帳號
• 授權檔可從檔名區分不同類型
  • db2aese_c.lic - DB2 Advanced Enterpriese Server Edition(aese), CPU License type(_c)
  • db2ese_c.lic - DB2 Enterpriese Server Edition(ese), CPU License type(_c)
  • db2wse_c.lic - DB2 Workgroup Server Edition(wse)，CPU License type(_c)
  • db2aese_t.lic - DB2 Advanced Enterpriese Server Edition(aese), Trial License type(_t)
• 不同版本的授權檔不可互用
• V9.1 與 V9.7 的授權不可互用

TIP

_c 以 CPU 計價
_t 試用版
_u 以 USER 數計價

解開檔案

su - db2inst
unzip  DB2_AESE_CPU_QS_Activation_97.zip
cd  aese_c/

匯入前的授權資訊

db2licm -l

Product name:                     "DB2 Advanced Enterprise Server Edition"
License type:                     "License not registered"
Expiry date:                      "License not registered"
Product identifier:               "db2aese"
Version information:              "9.7"

db2level

DB21085I  This instance or install (instance name, where applicable: "mydev")
uses "64" bits and DB2 code release "SQL0907B" with level identifier
"080C0107".
Informational tokens are "DB2 v9.7.0.11", "s150922", "IP23944", and Fix Pack
"11".
Product is installed at "/opt/ibm/db2/V9.7".
 

開始匯入

db2licm -a db2/license/db2aese_c.lic

LIC1402I  License added successfully.

LIC1426I  This product is now licensed for use as outlined in your License Agreement.  USE OF THE PRODUCT CONSTITUTES ACCEPTANCE OF THE TERMS OF THE IBM LICENSE AGREEMENT, LOCATED IN THE FOLLOWING DIRECTORY: "/opt/ibm/db2/V9.7/license/en_US.iso88591"

匯入後的授權資訊

db2licm -l

Product name:                     "DB2 Advanced Enterprise Server Edition"
License type:                     "CPU Option"
Expiry date:                      "Permanent"
Product identifier:               "db2aese"
Version information:              "9.7"
Enforcement policy:               "Soft Stop"

TIPs：

若要移除授權可以執行

db2licm -r [Product identifier]

DB2 Instance 啟動

#> su - mydev
$> db2 "update dbm cfg using svcename DB2_mydev"
$> db2set DB2COMM=tcpip
$> db2set DB2CODEPAGE=950
$> db2set DB2AUTOSTART=NO
$> db2start
$> ps -ef | grep db2sysc

TIPs：

如果要變更預設的 Port，可以修改 /etc/services。

F.A.Q

./db2_install -f NOTSAMP