Install DB2 v8.2 on CentOS 4/5/6

Linux OS 安裝

OS 安裝選用的套件

• X Window System
• GNOME Desktop
• Editors
• Graphical Internet
• Text-based Internet
• Server Configuration Tools
• Legacy Network Server
  • rusers
  • rwho
• Development Tools
• Compatibility Arch Development
• Legacy Software Development
  • compat-boost-1331
• Administration Tools
• System Tools
• Compatibility Arch Support

必要得套件安裝

• pdksh
• nfs-utils

安裝前的系統參數調整

編輯 /etc/sysctl.conf

fs.file-max = 8192
kernel.shmmax = 1073741824
kernel.shmall = 471859
kernel.msgmni = 4096
kernel.sem = 250 256000 32 2048
vm.lower_zone_protection = 250   #for CentOS 4.x only

TIPs：

kernel.shmax : 32bit 系統的最低需求是 268435456 (256 MB)，而在 64 位元的系統中，則為 1073741824 (1 GB)，建議設為實體記憶體的值
kernel.shmall: physical memory(KB) * 90% / 4, 2048 * 1024 * 90% /4= 471859.2 , 請注意不可小於 Table 所需的 buffer pool的總值，建議設為實體記憶體的 90%。

kernel.shmall: Maximum total size of shared memory in pages (normally 4096 bytes)
kernel.shmmax: Maximum size of shared memory segment in bytes

官網教學：
Modifying kernel parameters and user limits (Linux, AIX, HP-UX, Solaris)
核心參數需求(Linux)

套用設定

#> sysctl -p

#> ipcs -l

------ Shared Memory Limits --------
max number of segments = 4096          //SHMMNI
max seg size (kbytes) = 1048576        //SHMMAX
max total shared memory (kbytes) = 1887436  //SHMALL
min seg size (bytes) = 1

------ Semaphore Limits --------
max number of arrays = 2048             //SEMMNI
max semaphores per array = 250
max semaphores system wide = 64000
max ops per semop call = 32
semaphore max value = 32767

------ Messages: Limits --------
max queues system wide = 4096             //MSGMNI
max size of message (bytes) = 8192
default max size of queue (bytes) = 16384 //MSGMAX

TIPs:

如何檢查目前運行中系統的這些參數設定值:

cat /proc/sys/kernel/shmall
cat /proc/sys/kernel/shmax

oom-kill 值修改為 0 (for CentOS 4.x only)

#> echo 0 > /proc/sys/vm/oom-kill

開始安裝 DB2 Server 主程式

在 X Window 環境下安裝)

#> tar xzf DB2_V82_ESE_LNX_AMD64_NLV.tar.gz
#> cd ese
#> db2setup

Install Products
> Installation Type: Typical
> Install DAS

• username: db2as
• group: db2asadm
• Home: /home/db2as

> Set up a DB2 Instance: Do not create a DB2 Instance
> Set up the administration contact list

• Local
• Enable notification: 不要選

NOTE:

出現警告視窗：未指定 SMTP server

選擇 OK 繼續下一步驟

> Finish，開始安裝主程式

TIPs:

沒有 X Window 環境下安裝，可執行 ./db2_install，然後輸入 DB2.ESE

安裝 DB2 FixPak 18

#> tar xf FP18_MI00295.tar
#> cd FP18_MI00295
#> mkdir db2fp18
#> tar xf FP18_MI00295.tar -C db2fp18/
#> cd db2fp18
#> ./installFixPak -y

重啟主機

新增 Instance

建立 帳號/群組

#> groupadd db2adm
#> useradd -g db2adm -c "DB2 Instance User" db2inst

以下可忽略，系統在新增 Instance 時會自動編輯這個檔案。
編輯 /etc/services

# DB2_db2inst      60000/tcp DB2_db2inst_1    60001/tcp DB2_db2inst_2    60002/tcp DB2_db2inst_END  60003/tcp

新增 DB2 Instance

#> cd /opt/IBM/db2/V8.1/instance/
#> ./db2icrt -s ese -u db2inst -w 64 db2inst

TIPs:

64-bit 系統環境必須加上 -w 64，否則會是 32-bit 的 Instance

未授權的訊息

#> su - db2inst
#> db2licm -l

Product Name                            = "DB2 Enterprise Server Edition"
Product Identifier                      = "DB2ESE"
Version Information                     = "8.2"
Expiry Date                             = "11/06/2013 (Try & Buy)"
Registered Connect User Policy          = "Disabled"
Number Of Entitled Connect Users        = "5"
Enforcement Policy                      = "Soft Stop"
Number of processors                    = "1"
Number of licensed processors           = "1"
Database partitioning feature           = "Entitled"
Annotation                              = ""
Other information

軟體版本

#> su - db2inst
#> db2level

DB21085I  Instance "db2inst" uses "32" bits and DB2 code release "SQL08029"
with level identifier "030A0106".
Informational tokens are "DB2 v8.1.3.160", "s090715", "MI00295", and FixPak
"18".
Product is installed at "/opt/IBM/db2/V8.1".
註：顯示 "32" bits 表示該 instance 並非 64-bit。

匯入授權檔

#> su - db2inst
#> db2licm -a db2ese.lic

已授權的訊息

#> db2licm -l

Product Name                            = "DB2 Enterprise Server Edition"
Product Identifier                      = "DB2ESE"
Version Information                     = "8.2"
Expiry Date                             = "Permanent"
Registered Connect User Policy          = "Disabled"
Number Of Entitled Connect Users        = "5"
Enforcement Policy                      = "Soft Stop"
Number of processors                    = "1"
Number of licensed processors           = "1"
Database partitioning feature           = "Not entitled"
Annotation                              = ""
Other information                       = ""

DB2 啟動及驗證

#> su - db2inst
#> db2 "update dbm cfg using svcename DB2_db2inst"
#> db2set DB2COMM=tcpip
#> db2set DB2CODEPAGE=950
#> db2set DB2AUTOSTART=NO
#> db2start
#> ps -ef | grep db2sysc

TIPs:

第一次啟動 DB2 必須加上 db2set 的一些參數

如果有正常啟動，執行 netstat -lt 檢查，應該要出現  *:DB2_db2inst，如果沒有，在啟動 Instance 前先執行
db2set DB2COMM=tcpip

如果出現這錯誤，將 DB2COMM=tcpip 移除
SQL5043N  Support for one or more communications protocols failed to start successfully. However, core database manager functionality started successfully.

建立資料庫

#> su - db2inst
$> mkdir devmmdb/
$> db2 "create db DEVMMDB on /home/db2inst/devmmdb using codeset big5 territory TW collate using identity"

$> db2 list db directory
$> db2 connect to devmmdb 

重要的調整

$> db2 "get db cfg"

 Log file size (4KB)                         (LOGFILSIZ) = 1000
 Number of primary log files                (LOGPRIMARY) = 3
 Number of secondary log files               (LOGSECOND) = 2
 Changed path to log files                  (NEWLOGPATH) =
 Path to log files                                       = /home/devmm/DEVMMDB/devmm/NODE0000/SQL00001/SQLOGDIR
 Block log on disk full                (BLK_LOG_DSK_FUL) = YES

$> mkdir /home/devmm/DEVMMDB/log
$> db2 "update db cfg for DEVMMDB using LOGFILSIZ 12800"
$> db2 "update db cfg for DEVMMDB using LOGPRIMARY 10"
$> db2 "update db cfg for DEVMMDB using LOGSECOND 10"
$> db2 "update db cfg for DEVMMDB using NEWLOGPATH /home/devmm/DEVMMDB/log"
$> db2 "update db cfg for DEVMMDB using BLK_LOG_DSK_FUL YES"