進階技巧

    內容表格
    沒有標頭

    版本為 06:53, 30 Nov 2024

    到這個版本。

    返回到 版本存檔.

    查閱目前版本

    此篇所紀錄都是進階技巧,除非很熟悉每一個用法,否則請勿輕易嘗試。

    //從遠端強制重開機

    http://<spa-ip-addr>/admin/reboot

    //從遠端強制更新設定檔

    http://<spa-ip-addr>/resync?[[protocol://][server-name[:port]]/profile-pathname]
    如果 /resync? 之後不接任何參數,表示使用 provisioning 的設定檔規則。

    //Dialplan 範例

    The most confusing part of configuring a SPA3000 is setting the correct dial plan. Below are the standard NodePhone dial plans and its individual components.

    Note: The dial plan gw0 refers to the standard telephone line (PSTN line) and gw1 refers to the NodePhone line.

    Getting to Know Dial Plans

    • (000S0<:@gw0>

    This forces all 000 calls out through a standard phone line.

    • |106S0<:@gw0>

    This is the disabled equivalent of 000 and forces calls out through a standard phone line.

    • 183[12]x.

    This captures the four digit code used to power on or off the Caller Line Identification (CLID) for the call and passes the call to NodePhone.

    • |1[38]xxxxxxxxS0<:@gw0>

    This line captures 1300 or 1800 numbers and passes them out through a standard phone line.

    • |13[1-9]xxxS0<:@gw0>

    This line captures numbers starting with 13 (ie: 13 66 33) and passes them through a standard phone line.

    • |1[9]xxxxxxxxS0<:@gw0>

    This line captures numbers starting with 19 (ie: 1900 numbers) and passes them through a standard phone line.

    • |0[23478]xxxxxxxxS0

    This line captures STD or mobile phone calls and sends them out through the NodePhone.

    • |[2-9]xxxxxxxS0

    This line captures dialed eight digit numbers (ie: local calls) and sends them out through the NodePhone.

    • |001xxxx.S5

    This line captures dialed international numbers (0011 numbers) and sends them out through the NodePhone.

    • |xxx.<:@gw0>

    This line captures other possible numbers that may be dialed and haven't had a rule explicitly defined for them. This sends calls out through a standard phone line.

    • |*xx.

    This line allows you to press the asterisk (*) to activate additional features associated with the NodePhone.

    • |<#,:>xx.<:@gw0>)

    This line allows you to press the pound (#) key before dialing to force the call out through a standard phone line.

     

    //

    Powered by MindTouch Core