此篇所紀錄都是進階技巧,除非很熟悉每一個用法,否則請勿輕易嘗試。
//從遠端強制重開機
http://<spa-ip-addr>/admin/reboot
//從遠端強制更新設定檔
http://<spa-ip-addr>/admin/resync?[[protocol://][server-name[:port]]/profile-pathname]
如果 /resync? 之後不接任何參數,表示使用 provisioning 的設定檔規則。
//Dialplan 範例 Note: The dial plan gw0 refers to the standard telephone line (PSTN line) and gw1 refers to the NodePhone line. Getting to Know Dial Plans This forces all 000 calls out through a standard phone line. This is the disabled equivalent of 000 and forces calls out through a standard phone line. This captures the four digit code used to power on or off the Caller Line Identification (CLID) for the call and passes the call to NodePhone. This line captures 1300 or 1800 numbers and passes them out through a standard phone line. This line captures numbers starting with 13 (ie: 13 66 33) and passes them through a standard phone line. This line captures numbers starting with 19 (ie: 1900 numbers) and passes them through a standard phone line. This line captures STD or mobile phone calls and sends them out through the NodePhone. This line captures dialed eight digit numbers (ie: local calls) and sends them out through the NodePhone. This line captures dialed international numbers (0011 numbers) and sends them out through the NodePhone. This line captures other possible numbers that may be dialed and haven't had a rule explicitly defined for them. This sends calls out through a standard phone line. This line allows you to press the asterisk (*) to activate additional features associated with the NodePhone. This line allows you to press the pound (#) key before dialing to force the call out through a standard phone line.
The most confusing part of configuring a SPA3000 is setting the correct dial plan. Below are the standard NodePhone dial plans and its individual components.
//