Was this page helpful?

指令集說明英文

    內容表格
    沒有標頭

    Supported options in MegaCli
    ----------------------------

    MegaCli -v
    MegaCli -help|-h|?
    MegaCli -AdpSetProp {CacheFlushInterval -val}|{ RebuildRate -val}
        |{PatrolReadRate -val}|{BgiRate -val}|{CCRate -val}
        |{ReconRate -val}|{SpinupDriveCount -val}|{SpinupDelay -val}
        |{CoercionMode -val}|{ClusterEnable -val}|{PredFailPollInterval -val}
        |{BatWarnDsbl -val} |{EccBucketSize -val} | {EccBucketLeakRate -val}
        | AlarmEnbl | AlarmDsbl | AlarmSilence -aN|-a0,1,2|-aALL
    MegaCli -AdpGetProp CacheFlush | RebuildRate | PatrolReadRate | BgiRate
        | CCRate | ReconRate | SpinupDriveCount | SpinupDelay | CoercionMode
        | PredFailPollInterval | EccBucketSize | EccBucketLeakRate | EccBucketCount
        | ClusterEnable | BatWarnDsbl | AlarmDsply -aN|-a0,1,2|-aALL
    MegaCli -AdpAllInfo -aN|-a0,1,2|-aALL  
    MegaCli -AdpGetTime -aN|-a0,1,2|-aALL  
    MegaCli -AdpSetTime yyyymmdd hh:mm:ss -aN   
    MegaCli -adpSetVerify -f fileName -aN|-a0,1,2|-aALL
    MegaCli -AdpBIOS {-Enbl [SOE|BE]}|-Dsbl|-Dsply -aN|-a0,1,2|-aALL
    MegaCli -AdpBootDrive {-Set -Lx}|-Get -aN|-a0,1,2|-aALL
    MegaCli -AdpAutoRbld -Enbl|-Dsbl|-Dsply -aN|-a0,1,2|-aALL
    MegaCli -AdpCacheFlush -aN|-a0,1,2|-aALL
    MegaCli -AdpPR -Dsbl|EnblAuto|EnblMan|Start|Stop|Info|{SetDelay Val}
             -aN|-a0,1,2|-aALL
    MegaCli -FwTermLog -BBUoff|BBUoffTemp|BBUon|BBUGet|Dsply|Clear -aN|-a0,1,2|-aALL
    MegaCli -AdpDiag [val] -aN|-a0,1,2|-aALL
              val - Time in second.
    MegaCli -AdpBatTest -aN|-a0,1,2|-aALL
    MegaCli -PDList -aN|-a0,1,2|-aALL
    MegaCli -PDGetNum -aN|-a0,1,2|-aALL
    MegaCli -pdInfo -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL  
    MegaCli -PDOnline  -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -PDOffline -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -pdMakeGood -physdrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -PDHSP {-Set [-Dedicated [-ArrayN|-Array0,1,2...]] [-EnclAffinity] [-nonRevertible]}
             |-Rmv -PhysDrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -PDRbld -Start|-Stop|-ShowProg |-ProgDsply
            -PhysDrv [E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL  
    MegaCli -PDClear -Start|-Stop|-ShowProg |-ProgDsply
            -PhysDrv [E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL  
    MegaCli -PdLocate -physdrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -PdMarkMissing -physdrv[E0:S0,E1:S1,...] -aN|-a0,1,2|-aALL
    MegaCli -PdGetMissing -aN|-a0,1,2|-aALL
    MegaCli -PdReplaceMissing -physdrv[E0:S0] -arrayA, -rowB -aN
    MegaCli -PdPrpRmv [-UnDo] -physdrv[E0:S0] -aN|-a0,1,2|-aALL  
    MegaCli -EncInfo -aN|-a0,1,2|-aALL
    MegaCli -PhyInfo -phyM -aN|-a0,1,2|-aALL  
    MegaCli -LDInfo -Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL
    MegaCli -LDSetProp  {-Name LdNamestring} | -RW|RO|Blocked | WT|WB|RA|NORA|ADRA
            | Cached|Direct | -EnDskCache|DisDskCache -Lx|-L0,1,2|-Lall -aN|-a0,1,2|-aALL
    MegaCli -LDGetProp  -Cache | -Access | -Name | -DskCache -Lx|-L0,1,2|-LALL  
            -aN|-a0,1,2|-aALL
    MegaCli -LDInit {-Start [-full]}|-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-LALL -aN|-a0,1,2|-aALL
    MegaCli -LDCC -Start|-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-LALL -aN|-a0,1,2|-aALL
    MegaCli -LDBI -Enbl|-Dsbl|getSetting|-Abort|-ShowProg|-ProgDsply -Lx|-L0,1,2|-LALL -aN|-a0,1,2|-aALL  
    MegaCli -LDRecon {-Start -rX [{-Add | -Rmv} -Physdrv[E0:S0,...]]}|-ShowProg|-ProgDsply
            -Lx -aN
    MegaCli -LdPdInfo -aN|-a0,1,2|-aALL
    MegaCli -LDGetNum -aN|-a0,1,2|-aALL
    MegaCli -CfgLdAdd -rX[E0:S0,E1:S1,...] [WT|WB] [NORA|RA|ADRA] [Direct|Cached]
            [-szXXX [-szYYY ...]] [-strpszM] [-Hsp[E0:S0,...]] [-AfterLdX] -aN
    MegaCli -CfgEachDskRaid0 [WT|WB] [NORA|RA|ADRA] [Direct|Cached] [-strpszM] -aN |-a0,1,2|-aALL
    MegaCli -CfgClr -aN|-a0,1,2|-aALL
    MegaCli -CfgDsply -aN|-a0,1,2|-aALL
    MegaCli -CfgLdDel -LX|-L0,2,5...|-LALL -aN|-a0,1,2|-aALL
    MegaCli -CfgFreeSpaceinfo -aN|-a0,1,2|-aALL
    MegaCli -CfgSpanAdd -r10 -Array0[E0:S0,E1:S1] -Array1[E0:S0,E1:S1] [-ArrayX[E0:S0,E1:S1] ...] -aN
    MegaCli -CfgSpanAdd -r50 -Array0[E0:S0,E1:S1,E2:S2,...] -Array1[E0:S0,E1:S1,E2:S2,...]
            [-ArrayX[E0:S0,E1:S1,E2:S2,...] ...] [WT|WB] [NORA|RA|ADRA] [Direct|Cached]
            [-strpszM] -aN
    MegaCli -CfgSave -f filename -aN   
    MegaCli -CfgRestore -f filename -aN   
    MegaCli -CfgForeign -Scan -aN|-a0,1,2|-aALL    
    MegaCli -CfgForeign -Dsply [x] -aN|-a0,1,2|-aALL    
    MegaCli -CfgForeign -Preview [x] -aN|-a0,1,2|-aALL    
    MegaCli -CfgForeign -Import [x] -aN|-a0,1,2|-aALL    
    MegaCli -CfgForeign -Clear [x] -aN|-a0,1,2|-aALL    
            x - index of foreign configurations. Optional. All by default.
    MegaCli -AdpEventLog -GetEventLogInfo -aN|-a0,1,2|-aALL
    MegaCli -AdpEventLog -GetEvents     -f <fileName> -aN|-a0,1,2|-aALL
    MegaCli -AdpEventLog -GetSinceShutdown  -f <fileName> -aN|-a0,1,2|-aALL
    MegaCli -AdpEventLog -GetSinceReboot    -f <fileName> -aN|-a0,1,2|-aALL
    MegaCli -AdpEventLog -IncludeDeleted    -f <fileName> -aN|-a0,1,2|-aALL
    MegaCli -AdpEventLog -Clear -aN|-a0,1,2|-aALL
    MegaCli -AdpBbuCmd -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -GetBbuStatus -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -GetBbuCapacityInfo -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -GetBbuDesignInfo -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -GetBbuProperties -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -BbuLearn -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -BbuMfgSleep -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -BbuMfgSeal -aN|-a0,1,2|-aALL  
    MegaCli -AdpBbuCmd -SetBbuProperties -f <fileName> -aN|-a0,1,2|-aALL
    MegaCli -AdpFacDefSet -aN
    MegaCli -AdpFwFlash -f filename [-NoSigChk] [-NoVerChk] -aN|-a0,1,2|-aALL  
     

    Was this page helpful?
    標籤 (Edit tags)
    • No tags
    您必須 登入 才能發佈評論。
    Powered by MindTouch Core