n2n VPN

Introduction

n2n is a layer-two peer-to-peer virtual private network (VPN) which allows users to exploit features typical of P2P applications at network instead of application level. This means that users can gain native IP visibility (e.g. two PCs belonging to the same n2n network can ping each other) and be reachable with the same network IP address regardless of the network where they currently belong. In a nutshell, as OpenVPN moved SSL from application (e.g. used to implement the https protocol) to network protocol, n2n moves P2P from application to network level.

In order to start using n2n, two elements are required:

A virtual network shared between multiple edge nodes in n2n is called a community. A single supernode can relay multiple communities and a single computer can be part of multiple communities at the same time. An encryption key can be used by the edge nodes to encrypt the packets within their community.

n2n tries to establish a direct peer-to-peer connection via udp between the edge nodes when possible. When this is not possible (usually due to special NAT devices), the supernode is also used to relay the packets.

n2n_network.png

n2n_com.png

Installation

Download: https://github.com/ntop/n2n

Ubuntu/Debian

sudo dpkg -i n2n_3.0.0-1038_amd64.deb
sudo apt install -f
Usage

One-liner command in foreground.

# On Linux, change the community, encrypt key and tun IP to your own
# edge -c <community> -k <encrypt key> -a <tun IP address> -l <supernode host:port> -f
sudo edge -c my-community -k my-secret -a 10.9.9.10 -l n2n.lucktu.com:10090 -f

Run as service in background.

# Generate the config file
sudo cp /etc/n2n/edge.conf.sample /etc/n2n/edge.conf

# Start the edge
sudo systemctl start edge
sudo systemctl enable edge
Supernode
sudo supernode -p 10090
相關連結





Revision #11
Created 22 June 2022 06:40:11 by Admin
Updated 2 July 2022 09:28:35 by Admin