常用指令
Logical Volume - LV
# 顯示所有 LV 使用狀況
lvdisplay -C
# 新增 LV
lvcreate -L 10G -n LV_name VG_name
# 刪除 LV
lvremove /dev/VG_name>/LV_name
# 更名 LV
lvrename /dev/VG-name/old-LV-name /dev/VG-name/new-LV-name
# 顯示 LV 狀況
lvs
lvs -a -o name,copy_percent,devices
lvs -a -o name,copy_percent,devices <vg-name>
lvs -a --segments -o +devices
# 擴充 LV 使用空間
lvextend -L +2G /dev/vg/lv
lvextend -l +100%FREE /dev/vg_db2v9/lv_root 將剩餘空間都加上
ext2online /dev/vg/lv (RHEL v4)
resize2fs /dev/vg/lv (RHEL v5,6)
xfs_growfs /dev/vg/lv (RHEL v7 with XFS filesystem)
# 縮小 LV 空間 (RHEL v4)
#說明：445GB -> 2GB
umount /worktmp
e2fsck -f /dev/rootVG/worktmpLV
resize2fs /dev/rootVG/worktmpLV 1843M
lvreduce -L 2GB /dev/rootVG/worktmpLV
resize2fs /dev/rootVG/worktmpLV
mount /worktmp
#註：1843MB 大約是要 2GB 的 90%，這裡的指令也能使用單位 GB
# Shrinking LV (RHEL 5/6)
#100 GB -> 5GB
umount /opt/oracle/arclog
resize2fs /dev/VolGroup00/arclogLV 5G
lvreduce -L 5G /dev/VolGroup00/arclogLV
e2fsck -f /dev/VolGroup00/arclogLV
mount /opt/oracle/arclogVolume Group - VG
# 顯示 VG 使用狀況
vgdisplay -C
# 啟動/關閉 VG
vgchange -a y VG_name
vgchange -a n VG_name
#註：關閉後，執行 vgdisplay 仍會顯示，但 /dev/*** 已不存在。
# 新建 VG
vgcreate VG_name /dev/pv1 /dev/pv2
# 更名 VG
vgrename vg_esxa01db01 vg_root
# 刪除 VG
vgremove VG_name
# 增加 PV 到 VG
vgextend VG_name /dev/pv3
# 從 VG 中移除 PV
#NOTE: PV 必須沒有任何資料(檢查指令 pvs -o+pv_used)
vgreduce VG_name /dev/mypv Physical Volume - PV
# 顯示 PV 使用狀況
pvdisplay -C
# 檢查所有 PV 的空間使用狀況
pvs -o+pv_used
# 新增 PV
pvcreate /dev/hdd1
# 刪除 PV
pvremove /dev/hdd1
# 如果整個 disk 都要作為 PV，該磁碟不能建立任何磁區，要清除舊磁區可以執行
dd if=/dev/zero of=/dev/sdd bs=512 count=1
# 既有的 LUN Disk 增加磁碟空間後，還需要執行
pvresize /dev/sd[X]LVM 磁區的磁碟加大
在 RHEL 8 下，移除 LVM 磁區時，可能出現提示:
Do you want to remove the signature? [Y]es/[N]o:
注意: 這裡必須是 N，否則原有的磁區會被徹底清除。
技巧: 要確認 LVM 磁區是有完成延伸，或者不小心被移除，在 reboot 前執行
pvs
如果有顯示原有的 PV disk，表示磁區延伸成功。
Extend PV Disk: /dev/sda2 50GB to 100GB
[root@my-db2v11fp7 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 100G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 49G 0 part
├─rootvg-root 253:0 0 15G 0 lvm /
├─rootvg-swap 253:1 0 4G 0 lvm [SWAP]
└─rootvg-worktmp 253:2 0 512M 0 lvm /worktmp
sr0 11:0 1 1024M 0 rom
[root@my-db2v11fp7 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 rootvg lvm2 a-- <49.00g <29.50g
[root@my-db2v11fp7 ~]# fdisk -ul /dev/sda
Command (m for help): p
Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000def6b
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 104857599 51379200 8e Linux LVM
Command (m for help): d
Partition number (1,2, default 2): 2
Partition 2 is deleted
Command (m for help): p
Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000def6b
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2): 2
First sector (2099200-209715199, default 2099200):
Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-209715199, default 209715199):
Using default value 209715199
Partition 2 of type Linux and of size 99 GiB is set
Command (m for help): t
Partition number (1,2, default 2): 2
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): p
Disk /dev/sda: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000def6b
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 209715199 103808000 8e Linux LVM
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@my-db2v11fp7 ~]# reboot
[root@my-db2v11fp7 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 100G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 99G 0 part
├─rootvg-root 253:0 0 15G 0 lvm /
├─rootvg-swap 253:1 0 4G 0 lvm [SWAP]
└─rootvg-worktmp 253:2 0 512M 0 lvm /worktmp
sr0 11:0 1 1024M 0 rom
[root@my-db2v11fp7 ~]# pvresize /dev/sda2
Physical volume "/dev/sda2" changed
1 physical volume(s) resized or updated / 0 physical volume(s) not resized
[root@my-db2v11fp7 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 rootvg lvm2 a-- <99.00g <79.50g