RabbitMQ Cluster

• Clustering Guide — RabbitMQ
• RabbitMQ Learning III: RabbitMQ Clustering and Load Balancing
• How to Set Up the RabbitMQ Cluster on Ubuntu/Debian Linux
• Clustering Guide (vmware.com)
• RabbitMQ 集群搭建 (with HAProxy)

For Windows only

如何在 Windwos 上設定 RabbitMQ Cluster

A few things to RabbitMQ Cluster

• Message queues 預設只會在 Cluster 其中一個 node，而訊息仍可以透過其他 node 發送或接收；如果 Message queues 要抄寫至所有 nodes，必須設定為 Quorum Queues。
• Cluster 裡每一個 node 都是視為一個 peer，彼此都是相同的，沒有主次的分別。
• Cluster 的每個 node 之間使用 cookie 認證方式，cookie 檔路徑是 /var/lib/rabbitmq/.erlang.cookie 。
• 一個 Cluster 組成 的 Node 數量，應該為奇數，例如 3、5、7等。原因是這樣的個數，才能在有 node 中斷服務時，讓 Cluster 有多數決的識別並形成共識。
• Cluster 的網路架構必須是 LAN，而不是 WAN。

實驗節點

1. tpeeaprmq98 (node01)
2. tpeeaprmq981 (node02)
3. tpeeaprmq982 (node03)

/etc/hosts:

10.14.2.51      tpeeaprmq98
10.4.1.33       tpeeaprmq981
10.4.1.34       tpeeaprmq982

安裝 RabbitMQ

所有節點主機須完成 RabbitMQ 主程式安裝。

同步 Cookie 認證檔

scp /var/lib/rabbitmq/.erlang.cookie root@tpeeaprmq981:/var/lib/rabbitmq/
scp /var/lib/rabbitmq/.erlang.cookie root@tpeeaprmq982:/var/lib/rabbitmq/

新增 Cluster

Detach the service of all nodes

建立新的 Cluster 之前，所有 node 必須先卸載舊的 Cluster。

# On Node01
rabbitmq-server -detached

# On Node02
rabbitmq-server -detached

# On Node03
rabbitmq-server -detached

Verify the cluster status

[root@tpeeaprmq98 ~]# rabbitmqctl cluster_status
Cluster status of node rabbit@tpeeaprmq98 ...
Basics

Cluster name: rabbit@tpeeaprmq98

Disk Nodes

rabbit@tpeeaprmq98

Running Nodes

rabbit@tpeeaprmq98

Versions

rabbit@tpeeaprmq98: RabbitMQ 3.10.7 on Erlang 25.0.4

Maintenance status

Node: rabbit@tpeeaprmq98, status: not under maintenance

Alarms

(none)

Network Partitions

(none)

Listeners

Node: rabbit@tpeeaprmq98, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq98, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq98, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq98, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0

Feature flags

Flag: classic_mirrored_queue_version, state: enabled
Flag: drop_unroutable_metric, state: disabled
Flag: empty_basic_get_metric, state: disabled
Flag: implicit_default_bindings, state: enabled
Flag: maintenance_mode_status, state: enabled
Flag: quorum_queue, state: enabled
Flag: stream_queue, state: enabled
Flag: user_limits, state: enabled
Flag: virtual_host_metadata, state: enabled

[root@tpeeaprmq981 ~]# rabbitmqctl cluster_status
Cluster status of node rabbit@tpeeaprmq981 ...
Basics

Cluster name: rabbit@tpeeaprmq981

Disk Nodes

rabbit@tpeeaprmq981

Running Nodes

rabbit@tpeeaprmq981

Versions

rabbit@tpeeaprmq981: RabbitMQ 3.10.7 on Erlang 25.0.4

Maintenance status

Node: rabbit@tpeeaprmq981, status: not under maintenance

Alarms

(none)

Network Partitions

(none)

Listeners

Node: rabbit@tpeeaprmq981, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq981, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq981, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq981, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0

Feature flags

Flag: classic_mirrored_queue_version, state: enabled
Flag: drop_unroutable_metric, state: enabled
Flag: empty_basic_get_metric, state: enabled
Flag: implicit_default_bindings, state: enabled
Flag: maintenance_mode_status, state: enabled
Flag: quorum_queue, state: enabled
Flag: stream_queue, state: enabled
Flag: user_limits, state: enabled
Flag: virtual_host_metadata, state: enabled

[root@tpeeaprmq982 ~]# rabbitmqctl cluster_status
Cluster status of node rabbit@tpeeaprmq982 ...
Basics

Cluster name: rabbit@tpeeaprmq982

Disk Nodes

rabbit@tpeeaprmq982

Running Nodes

rabbit@tpeeaprmq982

Versions

rabbit@tpeeaprmq982: RabbitMQ 3.10.7 on Erlang 25.0.4

Maintenance status

Node: rabbit@tpeeaprmq982, status: not under maintenance

Alarms

(none)

Network Partitions

(none)

Listeners

Node: rabbit@tpeeaprmq982, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq982, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq982, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq982, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0

Feature flags

Flag: classic_mirrored_queue_version, state: enabled
Flag: drop_unroutable_metric, state: enabled
Flag: empty_basic_get_metric, state: enabled
Flag: implicit_default_bindings, state: enabled
Flag: maintenance_mode_status, state: enabled
Flag: quorum_queue, state: enabled
Flag: stream_queue, state: enabled
Flag: user_limits, state: enabled
Flag: virtual_host_metadata, state: enabled

Creating a Cluster

將 node02 與 node03 加入到 node01。

# On Node02
rabbitmqctl stop_app
rabbitmqctl reset
rabbitmqctl join_cluster rabbit@tpeeaprmq98
rabbitmqctl start_app

# On Node03
rabbitmqctl stop_app
rabbitmqctl reset
rabbitmqctl join_cluster rabbit@tpeeaprmq98
rabbitmqctl start_app

加入 cluster 時，出現以下訊息，可以直接忽略。

[root@tpeeaprmq981 ~]# rabbitmqctl join_cluster rabbit@tpeeaprmq98
Clustering node rabbit@tpeeaprmq981 with rabbit@tpeeaprmq98

15:10:18.438 [warning] Feature flags: the previous instance of this node must have failed to write the `feature_flags` file at `/var/lib/rabbitmq/mnesia/rabbit@tpeeaprmq981-feature_flags`:

15:10:18.438 [warning] Feature flags:   - list of previously disabled feature flags now marked as such: [:maintenance_mode_status]

15:10:18.561 [warning] Feature flags: the previous instance of this node must have failed to write the `feature_flags` file at `/var/lib/rabbitmq/mnesia/rabbit@tpeeaprmq981-feature_flags`:

15:10:18.561 [warning] Feature flags:   - list of previously enabled feature flags now marked as such: [:maintenance_mode_status]

15:10:18.598 [error] Failed to create a tracked connection table for node :rabbit@tpeeaprmq981: {:node_not_running, :rabbit@tpeeaprmq981}

15:10:18.598 [error] Failed to create a per-vhost tracked connection table for node :rabbit@tpeeaprmq981: {:node_not_running, :rabbit@tpeeaprmq981}

15:10:18.599 [error] Failed to create a per-user tracked connection table for node :rabbit@tpeeaprmq981: {:node_not_running, :rabbit@tpeeaprmq981}

Verify the cluster status

每個 node 的 Cluster 狀態應該都要一樣，除了 Cluster name 會顯示目前所在的 node name。

[root@tpeeaprmq98 ~]# rabbitmqctl cluster_status
Cluster status of node rabbit@tpeeaprmq98 ...
Basics

Cluster name: rabbit@tpeeaprmq98

Disk Nodes

rabbit@tpeeaprmq98
rabbit@tpeeaprmq981
rabbit@tpeeaprmq982

Running Nodes

rabbit@tpeeaprmq98
rabbit@tpeeaprmq981
rabbit@tpeeaprmq982

Versions

rabbit@tpeeaprmq98: RabbitMQ 3.10.7 on Erlang 25.0.4
rabbit@tpeeaprmq981: RabbitMQ 3.10.7 on Erlang 25.0.4
rabbit@tpeeaprmq982: RabbitMQ 3.10.7 on Erlang 25.0.4

Maintenance status

Node: rabbit@tpeeaprmq98, status: not under maintenance
Node: rabbit@tpeeaprmq981, status: not under maintenance
Node: rabbit@tpeeaprmq982, status: not under maintenance

Alarms

(none)

Network Partitions

(none)

Listeners

Node: rabbit@tpeeaprmq98, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq98, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq98, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq98, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0
Node: rabbit@tpeeaprmq981, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq981, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq981, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq981, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0
Node: rabbit@tpeeaprmq982, interface: [::], port: 15672, protocol: http, purpose: HTTP API
Node: rabbit@tpeeaprmq982, interface: [::], port: 1883, protocol: mqtt, purpose: MQTT
Node: rabbit@tpeeaprmq982, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication
Node: rabbit@tpeeaprmq982, interface: [::], port: 15690, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0

Feature flags

Flag: classic_mirrored_queue_version, state: enabled
Flag: drop_unroutable_metric, state: enabled
Flag: empty_basic_get_metric, state: enabled
Flag: implicit_default_bindings, state: enabled
Flag: maintenance_mode_status, state: enabled
Flag: quorum_queue, state: enabled
Flag: stream_queue, state: enabled
Flag: user_limits, state: enabled
Flag: virtual_host_metadata, state: enabled

Node 管理

增加新 Node

# Copy Cookie from one node of the cluster
scp /var/lib/rabbitmq/.erlang.cookie root@<new-node>:/var/lib/rabbitmq/

# Join a new node into the cluster rabbit@tpeeaprmq98
rabbitmqctl stop_app
rabbitmqctl reset
rabbitmqctl join_cluster <cluster-name>
rabbitmqctl start_app
# Alternatively, you can join it as RAM node by following command
rabbitmqctl join_cluster <cluster-name>  --ram

移除 Node

rabbitmqctl stop_app
rabbitmqctl reset
rabbitmqctl start_app
rabbitmqctl cluster_status

# Force drop the node
rabbitmqctl forget_cluster_node <node-name>